The ONEstage MPD8, or Multi-Purpose Distro 8 outlet is a hybrid of the SPD8 and RPD8 products, with the addition of the DMM63 digital multi-meter as seen on the MD32 MD63 range of distros. Not to be pigeon-holed into a single-use case, the MPD8 is perfect for scenarios where a distro may be required to perform the dual function of providing power for rack-mounted equipment as well as powering extraneous equipment such as monitor consoles, DJ equipment or touring packages supplied by third parties.

Each of the 8 power channels is protected via a Hager ADC9 series MCB/RCD (also know as MCBO) which offer the rear output connectors the maximum possible current of 16a (10a on front) as well earth leakage protection.

On the front of the unit, you will find 4 T1 outputs with Power Present LEDs; discreetly mounted behind a transparent window of the medical grade polycarbonate overlay. On the rear of the MPD8 there are an additional 4 outlets with Flex mounting holes that allow either a 15a GPO or a TruCon in any position. The rear-mounted outlets also have Power Present LEDs on the front panel and all output are colour matched to suit the entire ONEstage range.

Features

Front panel 3 phase and Neutral present LED with fault indication.
Dual pole switching to comply to AS/NZS3002/20218x High quality 16/10, 6k, 30ma Hager brand MCBO/GFCI.
Multipurpose layout and connectors options facilitate a range of use cases.
Phase labelled outputs for easy load balancing.
Recessed Power Present LEDs for each output.
User-configurable rear outputs (TruCon or GPO).
3phase power meter with V, A, Hz, Pf and KVA (firmware updatable).
3phase DC power supply ensures the multi-meter is always on, even if the supply drops a phase or neutral.
Medical grade Polycarbonate Label and adhesive with a matte finish for discrete appearance
Tapeless labelling to correspond with the ONEstage SPD3 & 5
Brass protective earth bond for easy PAT testing
Compact 250mm depth
WAGO brand terminals for reliable operation and easy fault finding by qualified repair technicians
Highly flexible 6mm2 Ozo flex brand supply cable. 2 meters in length
Fitted with Wilco 50A supply plug (other options available on request)
Proudly made in Melbourne Australia

Limitations

Not for standalone use, Must be housed in 19" rack mount compatible enclosure
Whilst every effort was made to prevent the potential ingress of dust and moisture, the MPD8 is NOT officially IP rated.
Supply must be fitted with suitable sized over current protection
Specs are subject to change without notice